BJM R250-115V Dewatering Pump - 201359

BJM R250-115V Dewatering Pump - 201359

BJM R250-115 Dewatering PumpBJM R Series Slim-line Dewatering Pumps are ideal for tight applications and will easily fit into casings as small as 8" in diameter.

Features

• Top Discharge Dewatering Pump
• 0.33 HP, 115 v, single phase
• 47.5 GPM, 1.5" NPT-M
• Top discharge provides maximum motor cooling for continuous duty applications
• Standard 33 ft. power cord
• 304SS Motor Housing provides superior abrasion resistance and will not wear out like aluminum motor housings when pumping sandy water
• Motor is protected by double mechanical seals
• Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic
• An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering the seal chamber
• Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation
• Automatic switch turns pump motor off if temperature and/or amp draw raises too high
• When the motor cools the switch will automatically reset and the pump will turn back on
• Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components
• Features a special diaphragm value that prevents water backflow applications
• De watering construction sites & mines, circulating fountain water & all-around use in industrial plants and utilities

Specifications

What Our Experts Think

• Efficient Dewatering – Quickly removes water from job sites, basements, and industrial areas.
• Durable & Reliable – Built with rugged materials for long-lasting performance.
• Fully Submersible – Designed for continuous operation in submerged conditions.
• Versatile Applications – Ideal for construction, mining, and emergency flood control.
• 115V Power Compatibility – Convenient for standard electrical setups.

Q&A

Q: What is the BJM R250-115V Dewatering Pump used for?
A: It is designed for light-duty dewatering in construction, industrial, and residential applications.

Q: What is the discharge size?
A: It features a 2-inch discharge for efficient water removal.

Q: What type of motor does it have?
A: It has a 115V, ⅓ HP motor for reliable and energy-efficient performance.

Q: Can this pump handle solids?
A: Yes, it can handle water with small debris, making it suitable for various job sites.

Q: Is it corrosion-resistant?
A: Yes, it is built with durable materials to withstand harsh environments.

Q: Does it have thermal overload protection?
A: Yes, it includes built-in thermal protection to prevent motor overheating.

Maintenance Tips

• Keep Intake Clear – Regularly remove debris to prevent clogging and maintain efficiency.
• Inspect Seals & Cables – Check for wear, cracks, or leaks and replace damaged parts as needed.
• Monitor Performance – Watch for unusual noises, reduced flow, or overheating, which indicate potential issues.
• Lubricate Bearings – Ensure proper lubrication to reduce friction and extend pump lifespan.
• Check Power Supply – Verify the 115V power connection is stable and meets specifications.
• Proper Storage – Clean, dry, and store the pump in a cool, dry place to prevent rust and corrosion.