Alpha Tools Alpha 6" Pneumatic Stone Cutter - PSC-150

Alpha Tools Alpha 6" Pneumatic Stone Cutter - PSC-150

Alpha PSC-150 6" Pneumatic Stone CutterIntroducing a new industrial quality pneumatic stone cutter, called the PSC-150, which is equipped with a 2 hp motor, with a speed governor in the motor that regulates the air consumption according to the torque needed for the application. This regulation includes producing enough torque to cut 1-1/4" (3cm) stone slabs in one pass. In addition, Alpha recognized the need for an industrial quality portable stone cutter that is capable of miter cutting of 1-1/4" (3cm) materials with ease, so that any stone fabricator can use it when miter cuts are required, without time-consuming setup.

Features

• Since it is a pneumatic-powered motor, you can save the repair and maintenance costs of electric stone cutters when sink-hole cutting and groove-cutting for rodding applications
• Alpha offers a carriage that retrofits on the Alpha Guide Rail System to support the application of making precise miter cuts for the perfect lamination
• The PSC-150 offers kink-free water and air hoses to improve the maneuverability of the stone cutter
• The flexibility of the hoses helps reduce operator fatigue and improves the operation
• To ensure an extended maintenance interval, we also recommend using the manifold system that comes with a regulator and filter to catch the debris and moisture delivered by compressed air
• The Alpha PSC-150 comes with an Eclipse II 6" blade, which is the recommended turbo blade for granite and engineered stone
• It can utilize a variety of consumables including the Alpha Katana 6" for porcelain panels and slabs, Hot-Rod 4" for 1/4" steel rods and 1/8" fiber glass rods
• For marble applications, a Libero 5" blade is recommended since most marble slabs are 3/4" (2cm) thick or less

Included

• Alpha PSC-150 6" Pneumatic Stone Cutter
• Alpha Eclipse II 6" Diamond Blade (DEE006)
• Side Handle (reversible)
• Combination Wrench (9 mm)
• Hex Wrench (5 mm)
• Open End Spanner Wrench (22 mm)
• Air Hose (15 ft./ 4.5 m)
• Water Hose (15 ft./ 4.5 m)
• Rust Inhibitor Oil (8 oz. AIR-008)
• 3x Flanges
• 2x Bolts (M6x30 Left, M6X30 Right)
• Operator's manual

Specifications

What Our Experts Think

• Powerful Pneumatic Performance – Delivers consistent cutting power without overheating.
• Precision Stone Cutting – Ideal for granite, marble, and engineered stone applications.
• Lightweight & Ergonomic – Designed for comfortable, extended use.
• Water-Feed System – Reduces dust and improves blade longevity.
• Durable Construction – Built for professional stone fabrication and job site use.

Q&A

Q: What is the Alpha PSC-150 Pneumatic Stone Cutter used for?
A: It is designed for precision cutting of stone, quartz, granite, and other hard surfaces in wet or dry applications.

Q: What materials can it cut?
A: It efficiently cuts through natural stone, engineered stone, quartz, and other dense materials.

Q: What size blade does it use?
A: It is compatible with 6-inch diamond blades for clean and accurate cuts.

Q: Does it support wet cutting?
A: Yes, it features a water feed system to minimize dust and cool the blade during operation.

Q: What type of power does it use?
A: It operates on pneumatic (air) power, making it ideal for environments where electricity is limited.

Q: Is it suitable for professional use?
A: Yes, it is designed for contractors and fabricators requiring high-performance stone cutting.

Maintenance Tips

• Keep Air Supply Clean – Use a filtered, dry air supply to prevent internal damage.
• Lubricate Regularly – Apply pneumatic tool oil before and after use to maintain smooth operation.
• Check Blade Wear – Replace worn or dull blades to ensure precise cutting.
• Inspect Hoses & Fittings – Look for leaks or cracks in air hoses and secure connections.
• Clean After Use – Remove dust and debris to prevent buildup and corrosion.
• Store Properly – Keep in a dry, dust-free area to prolong tool life.