Get In Touch
Get In Touch +1 (888) 851-3898





Dial +1 (888) 851-3898
grab it before it's gone.
As low as possible.
Never used.
$200.00
$70.00
$100.00
$30.00
$300.00
$100.00
Products added to cart!
The 4-pack of Rockford Fosgate P2D2-10 10" 600 Watt 2-Ohm Punch Series Car Audio Subwoofers will provide "The Punch" you desire. This sub features Kevlar fiber reinforced paper cones that will deliver superior bass impact; VAST technology that increases the cone surface area up to 25%; an Anodized Voice Coil Former that provides superior heat dissipation (up to 100° at full power levels); A Flex Fit Basket that allows fine-tuning of the mounting position; Stitched Tinsel Leads that reduces fatigue and possible shorting while increasing reliability and performance. The P2D2-10 sub performs best in standard sealed and vented enclosures, and conforms to CEA-2031 industry standards to offer the capacity to handle power under continuous demand, not instantaneous power handling, that over time, can damage voice coils. If you are looking for thumping bass, look no further than the Rockford Fosgate P2D2-10 10" 600 Watt 2-Ohm Punch Series Subwoofer!
NEW Rockford Fosgate P2D2-10 10" 600 Watt 2-Ohm Punch Series Car Audio Subwoofer (4-pack)
Power Handling
600 Watts MAX
300 Watts RMS
Kevlar fiber reinforced paper cone
Stitched Tinsel Leads
Anodized Aluminum Voice Coil Former
Flex Fit Basket
VAST Surround
Dual linear spider with embedded 16 AWG tinsel leads
Custom 10-AWG nickel plated push terminals
StampCast basket with integrated spider venting
Protective PVC textured magnet cover
High-temp voice coil with spun-laced Nomex® re-inforcement collar
Extended pole piece and bumped vented backplate
Diamond cut cast aluminum trim ring with optional grille (grille insert not included)
CEA-2031 Compliant
| Size: | 10" |
|---|---|
| Nominal Impedance: | Dual 2-Ohm |
| Voice Coil Diameter: | 2.25" (57.7 mm) |
| Magnet Weight: | 66.4 oz. (1.88 kg.) |
| Speaker Connector: | Dual 10 AWG compression |
| Fs (Hz): | 29 |
| Re (Ohms): | 3.20 |
| Le (mH): | 3.32 |
| Qms: | 7.00 |
| Qes: | 0.54 |
| Qts: | 0.50 |
| Vas (Liters): | 35.4 |
| Sd (cm2): | 360 |
| SPL (dB @ 1w/1m): | 84 |
| Xmax (mm): | 11 |
| Subwoofer Displacement: | 0.088 Cu. Ft. (2.5 Liters) |
| Cutout Diameter: | 9.13 Inches (232 mm) |
| Mounting Depth: | 5.92 Inches (150.4 mm) |
| Quantity: | 1 Subwoofer |
| Weight: | 13.6 lbs (shipping) |
| Part Number: | P2D2-10 |
Order shipment preparation takes 3 days. Once shipped orders usually take 2 weeks to be delivered. These are estimations; delivery can be delayed for reasons beyond our control. You can always contact us to know the exact delivery time once you placed an order with us. Have a look at our shipping policy here.
Thanks for subscribing!
This email has been registered!